This page is for pallet pricing only. Many of these products are not available for retail. We don't have a full selection, but what we have for sale is at the best price available around. Hopefully one of these will fit your plans or idea.
CEDAR | FIR | FIBER CEMENT | REDWOOD | PINE | SHEETS |
Premium(STK) means it is a select tight knot grade
#3 will have various blems that kept it from the #2 like a small end check, a missing edge knot, or an unsanded area. With a little waste you can end up with just as nice of an end result at a fraction of the price.
Utility is the lowest grade the mill makes and has manufacturing blems, missing knots, checks, or wane. It is usually good for chopping into short lengths perfect for high end chicken coop or dog house builders. It is popular with lawn furniture builders as well. Nurseries use this grade for plant racks/tables often too.
(0.666 in. x 5.375 in. with 5 in. coverage / reveal)
Resawn face with a smooth back. Flush where the edges meet. The #3 will have some blemishes that didn't make the standard grade, but with a little selection you can get a great result with great savings.
70¢LF by the unit
(0.666 in. x 5.375 in with 5 in. of coverage / reveal)
This is the lowest grade the mill makes there will be peck, knots, and some splits. If you are after rustic paneling this can be great with a little selection. This grade is popular for barns and other animal stuctures.
Low cost of 19¢LF by the pallet
(0.563 in. x 5.156 in. with 5 in. Coverage/reveal)
This is the downfall from premium Doug Fir beaded ceiling runs. There is a variety of blemishes that kept these from the premium grade, but it makes pretty good rustic paneling if you use the V-Edge face and it makes a good chop up grade for wainscotting and furniture projects.
20¢LF by the unit
(0.654 in. x 7.125 in. with 6.625 in. coverage / reveal)
This is a rustic grade of siding / paneling and will have various characteristics that kept it from the higher grades, but is still good enough to use on many projects.
39¢LF by the unit
Boise Cascade brand MDF paneling gives a great look with consistent quality. 1/4" Thickness doesn't take up more room space. Easy to install and ready to paint. Can be used full height or cut down for wainscotting. Interior use only.
13.75 SqFt individual packs $12.99ea+tax
or
275 SqFt Box $250 Tax Included
or
1650 SqFt pallet $1350 Tax Included
Also available 8' Moulding Set with baseboard and wainscott cap $6ea+tax
Boise Cascade brand MDF paneling gives a great look with consistent quality. 1/4" Thickness doesn't take up more room space. Easy to install and ready to paint. Interior use only.
9.17 SqFt individual packs $8.99ea+tax
or
183.4 SqFt Box $175 Tax Included
or
733.6 SqFt pallet $600 Tax Included
Also available 8' Moulding Set with baseboard and wainscott cap $6ea+tax
(0.7 in. x 3.125 in. with 3 in. coverage/reveal)
This T&G pine is smooth with an edge and center bead one side and smooth V edge back. The number #3 is one step down from the standard #2 and with a little work and selection your project will come out looking close for a fraction of the cost. These units are graded as common so blue stain is allowed in this grade.
95¢ea by the unit
(0.7 in. x 5.375 in. with 5 in. coverage/reveal)
This T&G pine is smooth with a V-Edge one side and smooth Double V Back. This is the standard grade of pine T&G.
89¢LF by the unit
(0.7 in. x 11.125 in. with 10.75 in. coverage/reveal)
This T&G pine is smooth with a V-Edge one side and smooth square edge back that meets flush. The number #3 is one step down from the standard #2 and with a little work and selection your project will come out looking close for a fraction of the cost. These units are graded as common so blue stain is allowed in this grade.
99¢LF by the unit
(0.7 in. x 9.125 in. with 8.75 in. coverage/reveal)
This T&G pine is smooth with a V-Edge one side and smooth square edge back that meets flush. The number #3 is one step down from the standard #2 and with a little work and selection your project will come out looking close for a fraction of the cost. These units are graded as common so blue stain is allowed in this grade.
89¢LF by the unit
(0.7 in. x 7.125 in. with 6.75 in. coverage/reveal)
This T&G pine is smooth with a V-Edge one side and smooth square edge back that meets flush. The number #3 is one step down from the standard #2 and with a little work and selection your project will come out looking close for a fraction of the cost. These units are graded as common so blue stain is allowed in this grade.
59¢LF by the unit
(0.666 in. x 5.375 in. with 5 in. coverage/reveal)
This T&G pine is smooth with a V-Edge one side and resawn V edge on the back, so you can choose smooth or rough. The number #3 is one step down from the standard #2 and with a little work and selection your project will come out looking close for a fraction of the cost. These units are graded as common so blue stain is allowed in this grade.
39¢LF by the unit
(0.666 in. x 5.375 in. with 5 in. coverage/reveal)
This T&G pine is smooth with a V-Edge one side and smooth square edge back that meets flush. The number #3 is one step down from the standard #2 and with a little work and selection your project will come out looking close for a fraction of the cost. These units are graded as common so blue stain is allowed in this grade.
36¢LF by the unit
(0.666 in. x 5.375 in. with 5 in. coverage/reveal)
This T&G pine is smooth with a V-Edge one side and smooth square edge back that meets flush. The number #3 is one step down from the standard #2 and with a little work and selection your project will come out looking close for a fraction of the cost. These units are graded as common so blue stain is allowed in this grade.
33¢LF by the unit
(0.719 in. x 7 in. with 6.5 in. coverage/reveal)
This T&G pine is smooth with a V-Edge one side and smooth Double V (looks like 2 PCS of 4" boards) the other side. The number #3 is one step down from the standard #2 and with a little work and selection your project will come out looking close for a fraction of the cost. This product has a 1/2" tongue instead of the standard 3/8" so it is narrower than usual. These units are graded as bright so there should be very little if any blue stain.
49¢LF by the unit
(0.719 in. x 7 in. with 6.5 in. coverage/reveal)
This T&G pine is smooth with a V-Edge one side and smooth Double V (looks like 2 PCS of 4" boards) the other side. The number #3 is one step down from the standard #2 and with a little work and selection your project will come out looking close for a fraction of the cost. This product has a 1/2" tongue instead of the standard 3/8" so it is narrower than usual. These units are graded as common so there may be blue stain.
49¢LF by the unit
(0.354 in. x 48.56 in. x 71.81 in.)
90 PC units $1575 Tax Included
Drilling, sawing, sanding or machining wood products generates wood dust and other substances known to the State of California to cause cancer Avoid inhaling dust generated from wood products or use a dust mask or other safeguards to avoid inhaling dust generated from wood products. Wood products emit chemicals known to the State of California to cause birth defects or other reproductive harm. California Health and Safety Code Section 25249.6